Oracle EXADATA X7-2 EF Installation Manual page 63

5. To disconnect connector C:
a. Place your left arm under the CMA to support it.
b. Use your right thumb to push in (toward the right) on the connector C
release tab labeled PUSH (callout 1), and pull connector C out of the right
slide-rail [frames 1 and 2].
Call Out
1
6. To disconnect connector B:
Place your right arm under the CMA to support it and grasp the back end of
a.
connector B with your right hand.
Description
Connector C release tab (labeled PUSH)
Remove the Cable Management Arm
Installing the Storage Server Into a Rack 63