Oracle EXADATA X7-2 EF Installation Manual page 50

Install the Cable Management Arm (Optional)
Call Out
7
8
9
10
2. Remove the flat cable covers and install the round cable covers.
a. Lift up on the cable cover handle (the handle is colored green) and open
it 180 degrees to the horizontal position as shown in the following figure
[frames 1 and 2].
Note -
following figure), and one with a single hinge. All three cable covers are shown in the previous
figure.
50 Oracle Exadata Storage Server X7-2 EF and HC Installation Guide • November 2018
Description
Slide-rail latching bracket (used with connector D)
Back slide bar
Oracle Storage Server X7-2 (1U) flat cable covers
Oracle Storage Server X7-2L (2U) round cable covers
The CMA has three cable covers, two with two hinges (one of which is shown in the