Oracle EXADATA X7-2 EF Installation Manual page 58

Install the Cable Management Arm (Optional)
b. To pull the green release tabs, place your finger in the center of each tab, not
on the end, and apply pressure as you pull the tab toward the front of the
server.
Continue pushing the storage server into the rack until the slide-rail locks
c.
(located on the front of the storage server) engage the slide-rail assemblies.
You hear an audible click when the storage server is in the normal rack position.
14. Connect cables to the storage server, as required.
Instructions for connecting the storage server cables are provided in
Server" on page
15. Open the CMA cable covers, route storage server cables through the CMA cable
troughs, close the cable covers, and secure the cables with the six Velcro straps.
Route the cables through the cable troughs in this order:
First through the front-most cable trough.
a.
58 Oracle Exadata Storage Server X7-2 EF and HC Installation Guide • November 2018
67.
"Cabling the Storage