Oracle EXADATA X7-2 EF Installation Manual page 52

Install the Cable Management Arm (Optional)
b. Gently tug on the left side of the front slide bar to verify that connector A is
properly seated.
Call Out
1
2
7. To install CMA connector B into the right slide-rail:
a. Insert CMA connector B into the front slot on the right slide-rail until it locks
into place with an audible click [frames 1 and 2].
The connector B tab (see callout 1) goes into the slide-rail front slot (callout 2).
52 Oracle Exadata Storage Server X7-2 EF and HC Installation Guide • November 2018
Description
Connector A tab
Left slide-rail front slot