Installer Compliance Responsibility - Ubiquiti GBE Quick Start Manual

7. 2. 2020
b. Review the Network settings to ensure that each device has a unique IP
address. Each can get its IP address via DHCP, or use a static IP address.
DHCP
network, the device will receive its address via DHCP.
Static
address.
c. Click Save Changes.
Repeat the instructions in the
UNMS Management
You can manage your device using UNMS, which lets you configure, monitor,
upgrade, and back up your devices using a single application. Get started at
www.unms.com

Installer Compliance Responsibility

Devices must be professionally installed and it is the professional installer's
responsibility to make sure the device is operated within local country regulatory
requirements.
https://dl.ui.com/qsg/GBE/GBE_EN.html
GBE Quick Start Guide
By default DHCP client is enabled; if there is a DHCP server on your
Note: If DHCP client fails, the device will use the fallback IP address:
192.168.1.20
Select this option to disable the DHCP client and enter a static IP
"Configuration"
GBE Quick Start Guide
section on the other GigaBeam.
13/18