Ubiquiti GBE Quick Start Manual page 9

Hide thumbs Also See for GBE:

Table of Contents

7. 2. 2020

Configuration

The device is set to DHCP by default, so it will try to automatically obtain an IP

address. If that fails, it will use the default fallback IP address, 192.168.1.20. Proceed

to the appropriate section, DHCP or

DHCP

Use one of the following methods:

Set up the DHCP server to provide a specific IP address to the device based on

its MAC address (on the label).

Let the device obtain an IP address and then check the DHCP server to see which

IP address was assigned.

1. Connect a computer to your network and configure the Ethernet adapter on your

computer with a static IP address on the 192.168.1.x subnet.

2. Launch your web browser. In the address field, type: https://192.168.1.20

Then press enter (PC) or return (Mac).

3. Select your Country and Language. You must agree to the Terms of Use to use

the product. Click Continue.

https://dl.ui.com/qsg/GBE/GBE_EN.html

GBE Quick Start Guide

Optional

"Fallback IP

Address":

9/18

Table of Contents