Ubiquiti GBE Quick Start Manual page 12

7. 2. 2020
5. Enter a Username and Password, confirm the Password, and click Save.
6. Click the
7. Configure the following settings:
a. For one device, enable Access Point mode. For the other device (the Station),
keep Access Point disabled.
b. Enter a name in the SSID field. This must be the same on both the AP and the
Station.
c. In the WPA2 Preshared Key field, enter a combination of alphanumeric
characters (0-9, A-Z, or a-z).
8. Click Save Changes.
9. Configure each device (AP and Station) with a unique IP address:
a. Click the
https://dl.ui.com/qsg/GBE/GBE_EN.html
GBE Quick Start Guide
icon.
Note: The key is an alphanumeric password between 8 and 63
characters long.
icon.
GBE Quick Start Guide
12/18