Important Information On Service Equipment Safety; Safety Devices; Layout Of The Manual; Use Of The Manual - MAHLE ACX120 Manual

EN | 7 | ACX120/220 | Layout of the manual
3.1.3 Important information on
service equipment safety
When using the equipment, the following
operations are not allowed as they might
cause, under
danger for persons and cause permanent
damage to the equipment itself.
- Do not remove or make
unreadable
and/or dangers signs placed
on the equipment and in the
area nearby.
- Do not disable the unit's
safety equipment.
- Use only fuses identical to
the originals as specified on
the nameplate; do not tamper
with or attempt to repair the
fuses.
If the power supply is known
or can be expected to vary
beyond the limits specified
for the service equipment,
immediately disconnect it.
- The electrical system to
which the service equipment
is
configured as provided by
local legislation.
- Only operators or qualified
staff instructed or certified for
the equipment maintenance
can open the equipment. The
equipment
which
electrocution: shut off power
to
servicing/repairing it.
© MAHLE
certain circumstances,
labels,
connected must
contains
can
the equipment
3.2
ACX
following safety devices:
signs
Failure to observe any of the above

safety

equipment's warranty.
be
4
4.1
parts

cause
before


Safety devices

120/220 is equipped with the
SAFETY PRESSURE SWITCH:
It stops the compressor in case
of excessive pressure.
SAFETY VALVE: The safety
valve opens when the pressure
inside the system reaches a
level higher than the fixed limits.
MAIN SWITCH: Switches the
equipment off by interrupting
the power supply. It is advisable
to pull the power cord plug out
of the mains socket in any case
before starting
work.
ANY TAMPERING WITH THE
ABOVE-MENTIONED SAFETY
DEVICES IS PROHIBITED.
instructions
Layout of the
manual

Use of the manual

This manual is an integral part
of the equipment and must be
kept in the
immediate vicinity
purchaser
This manual shall accompany
the equipment in case this is
passed on to a new user.
maintenance
voids the
equipment's
by the