1. Manuals
  2. Brands
  3. MAHLE Manuals
  4. Service Equipment
  5. BFX-20
  6. Operation manual

MAHLE BFX-20 Operation Manual

Brake fluid exchage unit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MAHLE BFX-20
Operation Manual
EN
Brake Fluid Exchage Unit

Advertisement

Table of Contents
loading

Related Manuals for MAHLE BFX-20

Summary of Contents for MAHLE BFX-20

  • Page 1 MAHLE BFX-20 Operation Manual Brake Fluid Exchage Unit...

  • Page 2: Table Of Contents

    2 | BFX-20 | Contents Information Document warnings Important notes 1.2.1 User group 1.2.2 Agreement Safety regulations 1.3.1 BFX-20 Technical data Product description Application Improper use Operating principle Scope of delivery Description of unit Commissioning 2.6.1 Unpack unit 2.6.2 Unit setup...
  • Page 3 | BFX-20 | 3 BFX-20 | 3 © MAHLE...

  • Page 4: Information

    Contact Warning Consequences of hazard in the event of failure MAHLE if you detect a problem that you cannot solve with this symbol to observe action and information given. manual.

  • Page 5: Safety Regulations

    BFX-20 Always carefully study and follow all the safety regulations before using the MAHLE product. Correct use of the BFX-20 is impor- Always use vehicle specified brake fluid. Failure to do so may tant for your personal safety and for trouble-free functionality.

  • Page 6: Product Description

    Improper use Operating the device with fluids other than brake fluid can damage the brake fluid exchange device and is thus forbid- den. In the event of improper use, MAHLE is not liable for any damage caused. Operating principle The brake fluid is withdrawn from the container by means of a pump and constantly pumped into the brake fluid vessel at a pressure of up to 3.5 bar.

  • Page 7: Commissioning

    Unpack unit When removing the packaging, use care to ensure there is You must strictly obey all safety instructions described in no damage caused to the BFX-20 unit or any of the included Section 1.3 of this manual. accessories. 1. Prior to initial operation, ensure proper voltage is being sup- Do not unplug any electrical connections and only have in- plied to the unit.

  • Page 8: Operation

    8 | BFX-20 | Operation Operation 1. Install the adapter included onto the opening of the brake fluid master cylinder. Removing brake fluid from reservoir 2. Connect the fill hose to the previously mounted adapter. 3. Power on the brake fluid exchange unit with switch 3.

  • Page 9: Maintenance

    Maintenance | BFX-20 | 9 BFX-20 | 9 Maintenance Disassembling control module Inform the manufacturer's service department if your brake If, after consulting the service department, a malfunction of fluid exchange unit still does not work properly even after the brake fluid exchange unit is determined, only the control following the previous instructions.

  • Page 10: Notes

    10 | BFX-20 | Notes Notes © MAHLE...
  • Page 11 Notes | BFX-20 | 11 BFX-20 | 11 | 11 © MAHLE...
  • Page 12 MAHLE Aftermarket Inc. 10 Innovation Drive York, PA 17402 717-840-0678 www.servicesolutions.mahle.com...

Table of Contents