Equipment Installation; Unpacking Acx120/220 - MAHLE ACX120 Manual

EN | 15 | ACX120/220 | Installation
7 Installation
7.1

Equipment installation

7.1.1

Unpacking ACX120/220

RISK OF OVERTURNING
The manufacturer
responsibility for damage to objects
and/or persons resulting from the
equipment being wrongly removed from
the pallet, or from the operation being
made by unsuitable personnel, with
© MAHLE
disclaims all
improper means/protections
without complying with the existing
laws on manual handling of loads and
with the operations described in this
manual.
 Cut the strap and remove the carton.
 Cut the straps securing the unit to the
pallet.
 Remove the equipment from the
pallet (2 operators required)
 Lift both front
wheels by
levering with the
handle and on
rear wheels (this
way the operators
must not lift the
full weight of the
unit)
 Keep the pallet, carton and scratch
protection film for use when returning the
unit. The unit rolls on wheels; the two
smaller wheels can be locked.
ACX120/220 is
accumulation tank empty. This prevents
problems in shipping the unit.
and
 Slowly
lower
the unit from the
pallet by means
of the rear wheels
supplied with the