Setup - MAHLE ACX120 Manual

9

Setup

From the SETUP menu it is possible to
select parameters and activations before
starting cycle:
ELECTRIC COMPRESSOR FUNCTION

by selecting this entry, one may
change the type of Oil to charge into
the A/C system.
HYBRID KIT
accessory) is required in order to run
this function
E³ CONNECT

by selecting this entry, you can
enable the E³ CONNECT function.
CHARGE MODE

by selecting this entry, one may
decide whether to enable use of the
Quick Mode
charge method
OIL CHARGE MODE

by selecting this entry, one may
decide the oil charge mode during
the charge cycle.
Automatic:
o
charge cycle, the user will
be prompted to enter the
quantity of oil to be charge
(ml) as well as the oil type,
PAG ( ISO-46/100/150) or
POE.
Manual: During the charge
o
cycle,
prompted to select YES in
case he wants to proceed
with the oil manual charge
before the refrigerant charge
phase, or NO in case he
Attention:
PRO (optional
or Zero Tolerance
during
the user will
A/C PERFORMANCE TEST

by selecting this entry, one can
enable or disable the pressure check.
AIR PURGE SYSTEM

by selecting this entry, one can
enable or disable the AIR PURGE
the
SYSTEM function. If enabled, on a
weekly basis, the station, when
switched on, will suggest the user to
run
execution of the procedure will no
longer be suggested.
REFRIGERANT CLEAN

by selecting this entry, one may
decide whether or not to enable the
refrigerant
enables
within the station itself, started in
automatic when it is switched on but
not in use. This function ensures a
higher level of purity of the recycled
refrigerant to the advantage of the
service quality.
RECOVERED REFRIGERANT AND OIL
the
PRINTING (ONLY WHEN PRINTER IS
INSTALLED)

selecting this entry, you can choose
whether
displaying
recovered
Setting available only with printer
installed.
be
REPORT SAVING MODE

by selecting this entry, you can save
the reports of the performed charges
(automatic cycle or Reg. 842/2006).
EN | 18 | ACX120/220 | Setup
doesn't want to charge oil
during the charge cycle.
the procedure.
clean function,
an additional
you want
and printing
refrigerant
If disabled,
which
recycling,
to enable
of the
quantity.
© MAHLE