Personal Safety Information - MAHLE ACX120 Manual

CLASSIFICATION OF OPERATORS
The operator can be classified according
to two main categories, which, in some
cases, refer to one single person:

The operator charged with the
equipment operation has the
duty to:
Start up and monitor
o
the
automatic cycle;
Carry out simple setting
o
operations;
Remove the causes of
o
equipment
implying breakings of
members
operating anomalies.

Maintenance
technician
authorised
capable
machine's
electrical components with its
guards
adjustments and to service and
repair it.
USER
Body or person legally responsible for the
equipment.
3.1.2

Personal safety information

The MAHLE ACX 120/220 A/C service
station is particularly simple and reliable
due to its adjustments and functions.
When used correctly it presents no
hazard for the operator, provided he
observes the following general safety
instructions and that the service station is
regularly serviced
maintenance/use
equipment's safety).
machine's
stop
but simple
technician
trained by
MAHLE centre,
of working on
mechanical
open to make
(incorrect
compromise
EN | 4 | ACX120/220 | Safety conditions
Before operating the service station for
the first time, read these instructions
carefully. If any part of the instructions is
unclear, contact your reseller or MAHLE.
This service station may be used by only
one equipment operator, familiar with A/C
and refrigeration systems and the hazards
associated with refrigerants and high
pressure equipment.
WORKPLACE: ACX120 can work with
not
R134a. ACX220 can work with R1234yf.
Refrigerant
flammable refrigerant.
Nonetheless, although refrigerant R134a
is not defined as flammable, mixtures of
a
air or oxygen with R134a may become
an
flammable
conditions.
the
The equipment
and
outdoor or in a well-ventilated location
(at least 1 air change per hour). The
workshop has to be equipped with
ventilation systems able to ensure air
change in every environment area or
carry out
opening the areas.
Use the equipment away from heat
sources or hot surfaces. The equipment
must not be used in explosion risk
environments
atmospheres). Before using it, put the
equipment on a levelled plane and secure
position, blocking it with suitable wheel
stops.
Do not expose the tool to direct sunrays,
heat sources, rain and jets of water. Do
not smoke near the equipment and during
operations (keep at a distance of at least
1 m).
The work area must be monitored by the
the
operator while the equipment is operating.
R1234yf is defined
under very
must be
periodical ventilation
(potentially
as
particular
operated
by
explosive
© MAHLE