Lutron Electronics Sivoia QS roller 100 Installation Instructions Manual page 8

4
Mount sub-brackets
4.1
Use fabric alignment holes to
position the sub-bracket right
to left. The fabric alignment
holes will line up with the out-
side edge of the shade tube.
Note: Fabric edge may not
line up with the edge of tube.
4.2
Once their position has
been established, insert
sub-brackets by hooking
their lower edges behind
notch in pocket surface.
If endcaps are being used,
they must be installed
prior to sub-brackets.
Page 7
Sivoia QS
®
ceiling
Ceiling
0.75 in
0.75 in.
(19mm)
(19 mm)
Fabric
Fabric
Alignment Alignment
Holes
Holes
Sub-Bracket detail
Sub-Bracket detail
ceiling
ceiling
roller 100 Pocket Mount
TM
Pocket width
Pocket width
Fabric width
Fabric width
System width
System width
glass
glass
Finished position
Finished Position
Installation instructions
0.75 in
0.75 in.
(19 mm) (19mm)