Lutron Electronics Sivoia QS roller 100 Installation Instructions Manual page 17

11
Setting limits from the EDU
Setting the close limit from the EDU
11.4
Tap the "close limit button" ( ) .
The green LED on the roller 100
EDU will turn on steady,
indicating that the EDU is
in "set close limit mode".
11.5
Adjust the position of the EDU to
the desired close limit using the
clockwise and counterclockwise
buttons ( ).
11.6
Press and hold the "close limit
button" ( ) for 5 seconds. The
green LED on the roller 100 EDU
will flash for 2 seconds, then go
dark, indicating that the current
position has been stored as the
close limit.
Sivoia QS
®
(continued)
Green LED
Tap the
close limit button
Use the
counterclockwise
and clockwise
buttons to move
the EDU
Flashing green LED
Press and hold the
close limit button
for 5 seconds
roller 100 Pocket Mount
TM
Page 16
Installation instructions