Lutron Electronics Sivoia QS roller 100 Installation Instructions Manual page 15

10
Secure and check the shade
10.1
Use the programming stylus to run the shade up and down using the adjustment
buttons ( ), re-level if needed.
NOTICE: Pay careful attention to the shade roll up to ensure that it does not
telescope extremely to one side or the other.
Tip: Slight telescoping is normal. However, if the shade is telescoping severely to one
side and it is level, press the "close limit button" ( ) , and lower the shade all the way
down using the adjustment buttons ( ). Place a piece of tape on the side of the tube
that the fabric is telescoping away from. When finished press the "close limit button" ( )
once. This technique is referred to as "shimming". The shade will always track towards
the side that the tape (shim) is placed on.
direction of fabric telescoping
direction of fabric telescoping
tape
tape
(shim)
(shim)
Shim will correct telescoping by
Shim will correct telescoping
moving fabric this way
by moving fabric this way
Page 14
Sivoia QS roller 100 Pocket Mount Installation instructions
® TM