Lutron Electronics Sivoia QS roller 100 Installation Instructions Manual page 7

3
Mount Pocket
3.1
If endcaps are being used, slide
them in the ends of the pockets.
Endcaps should only be used if
the pocket ends will be exposed.
3.2
Mount pocket securely using
appropriate fasteners.
CAUTION: Risk of bodily injury
from falling heavy object.
The sub-brackets for each pocket
must be mounted to support a weight
of at least 300 pounds (136 kg). The
fasteners provided with the sub-brack-
ets may not be appropriate for use in
all applications.
Screws must be at least 6 in
(152 mm) inside fabric width to avoid
sub-brackets.
Confirm pocket flap hanging feature
is on side opposite of glass before
tightening screws.
Sivoia QS
®
pocket
pocket
flap
flap
hanging
hanging
feature
feature
ceiling ceiling
roller 100 Pocket Mount
TM
glass
glass
Page 6
Installation instructions