Lutron Electronics Sivoia QS roller 100 Installation Instructions Manual page 6

2
Pre-drill pocket for cable run (continued)
NOTICE: When installing top/backcover, pocket, or headrail with a motorized
window shade the following steps must completed.
2.2
Description
When installing top/backcover, pocket, or
headrail with a motorized window shade,
a grommet must be used to protect the
power wire if it is run through the cover.
This will prevent the wire insulation from
being cut by any sharp edges caused
by drilling the top/backcover, pocket, or
headrail.
Installation of grommet
1. Insert the enclosed grommet into the
hole (be sure it is completely inserted
into the hole).
2. Run the power wire through the
grommet and finish the installation as
per the installation instructions enclosed
with your unit.
Page 5
Sivoia QS
®
Figure A
Figure B
roller 100 Pocket Mount
TM
Drill top/backcover,
pocket or headrail
(top/backcover
pictured)
Insert grommet
Installation instructions