Lutron Electronics Sivoia QS roller 100 Installation Instructions Manual page 16

11
Setting limits from the EDU
Setting the open limit from the EDU
The open and close limits define the top and bottom of the shade, and are used to determine
which direction the shade must turn in order to raise or lower. Refer to the keypad's instruction
sheet to set the limits remotely.
11.1
Tap the "Open limit button"
( ) . The green LED on the
roller 100 EDU will turn on steady,
indicating that the EDU is in
"Set open limit mode."
11.2
Adjust the position of the EDU to
the desired open limit using the
clockwise and counterclockwise
buttons ( ).
11.3
Press and hold the "open limit
button" ( ) for 5 seconds. The
green LED on the roller 100 EDU
will flash for 2 seconds, then go
dark, indicating that the current
position has been stored as the
open limit.
Page 15
Sivoia QS
®
Green LED
Tap the
open limit button
Use the
counterclockwise
and clockwise
buttons to move
the EDU
Flashing green LED
Press and hold the
open limit button
for 5 seconds
roller 100 Pocket Mount
TM
Installation instructions