Table of Contents
Advertisement
In the Advanced Settings tab (Figure 26), if you want all hotspot users to use the same authentication
server and login requirements, enter the server path information and set the Check internal field
(maximum time, in seconds), for logging in and the Client timed out field (maximum amount of time
before failure to authenticate times out, in minutes).
Figure 26: Advanced Settings
6.3.9 Connect Limit (CAT6/7 only)
For CAT6/7 UEs, you can use the Connect Limit feature to control the number of connections through
the UE to a host device, for example, a peer-to-peer file sharing application such as BitTorrent. Such
apps require a large amount of bandwidth. By limiting the number of connections to the host device,
you can control how much bandwidth each active connection receives. You can configure a Connect
Limit for up to 16 host devices.
To use Connect Limit, go to the Settings tab > Security Settings > Connect Limit (Figure 27). Enable the
feature, and click on Apply. This will open another dialogue window where you will enter the host
device's IP address on the LAN; and the Limit Value, which is the maximum number of active
connections to the host. The list of configured connection limits will appear at the bottom of the
window.
19
Advertisement
Table of Contents
