Figure 6: Check Status; Figure 7: Label - Baicells Atom ID0406-6.5 User Manual

Figure 6: Check Status

4. Connect Wi-Fi:
a. Ensure that the computer or other smart device has Wi-Fi (WLAN) enabled.
b. When the Wi-Fi LED on the unit shows "steady on", per
The Wi-Fi function can be enabled or disabled through the GUI.
c. Looking at the label on the back of the Atom unit, record the WLAN Name and WLAN
KEY (WPA/WPA2) values

Figure 7: Label

5. Proceed to section 5.2 Basic
(Figure 7).
To avoid unauthorized use of the Wi-
Fi/WLAN, go to the GUI and modify the
WLAN Name and Key (WPA/WPA2)
information from your service provider.
These fields are case-sensitive. On your
Wi-Fi enabled computer and other smart
devices, you can then look for the new
Wi-Fi/WLAN network name.
Configuration.
6
Table 3-1 LEDs, it is functional.