Display Symbols; Switching On; Leakage Test - Atmos S 201 Thorax Operating Instructions Manual

4.2.2 Display symbols

Figure Function
Battery status display / charging indicator
Keylock activated
Therapy recording in progress
Therapy on hold
Therapy in progress
Upcoming warning suppressed
Annual inspection is required

4.3 Switching on

4.4 Leakage test

The leakage test checks the tightness of the entire system. The leakage test function is activated
in the factory settings. The leakage test can be deactivated (chapter '4.9 User settings' on page
30).
Generally, it is recommended that the leakage test be performed prior to each application to
check for leakages.
• To switch on the ATMOS S 201 Thorax, touch the sensor
for 2 seconds.
• The ATMOS logo appears with the software version number
in the bottom right corner.
• Depending on the user settings, the leakage test starts
automatically after a short time (chapter '4.4 Leakage test'
on page 23).
• Subsequently, 'Therapy progress' will appear in the display.
V3.0.52
By pressing the buttons you can start a new therapy
recording or continue recording.
• The main display appears. The device is now ready for use.
23