Specifications - Toshiba B-570 SERIES Owner's Manual

2. SPECIFICATIONS

2. SPECIFICATIONS
2.1 Printer
Item
Supply voltage
Power consumption
Operating temperature range
Relative humidity
Print head
Printing methods
Print speeds
Maximum print width
Dispensing modes
Message display
Dimensions
Weight
Available bar code types
Fonts
Rotations
Standard interface
Optional interfaces
2.2 Option
Option Name
Cutter module
High speed PC inter-
face kit
Fanfold paper guide
module
D-RAM PC board
Flash memory card
NOTES: 1. Available from your nearest TOSHIBA TEC representative or TOSHIBA TEC Head Quarters.
2. Available from TOSHIBA TEC Parts Center.
3. When purchasing flash memory card locally, select one having the specifications described at page
8-1.
Model
AC 100V ~ 120V +10%, -15%, 50/60Hz +2Hz, -2Hz
2A, 198W maximum (standby: 500mA, 51W maximum)
5 C ~ 40 C
25% ~ 85%RH (no condensation)
Thermal print head 12 dots per mm (306 dots per inch)
Thermal direct or Thermal transfer
76.2 mm/sec. (3 inch/sec.), 127 mm/sec. (5 inch/sec.),
203.2 mm/sec. (8 inch/sec.),
127.5 mm (5.02 inches)
Batch (Continuous), Strip (On-demand) and Cut modes
(Cut mode is only available when optional cutter is fitted.)
20 characters x 1 line
291 mm (width) x 460 mm (depth) x 308 mm (height)
19 kg (without media and ribbon)
JAN8, JAN13, EAN8, EAN8+2digits, EAN8+5digits
EAN13, EAN13+2digits, EAN13+5digits
UPC-E, UPC-E+2digits, UPC-E+5digits
UPC-A, UPC-A+2digits, UPC-A+5 digits
MSI, ITF, NW-7, CODE39, CODE93, CODE128, EAN128
PDF417, DATA MATRIX, Industrial 2 to 5
Times Roman (6 sizes), Helvetica (6 sizes), Presentation (1 size),
Letter Gothic (1 size), Prestige Elite (2 sizes), Courier (2 sizes),
OCR (2 types), Writable characters (40 types), Outline font (1 type)
0 , 90 , 180 , 270
Serial interface (RS-232C)
Parallel interface (Centronics)
Expansion I/O interface
Flash memory card interface
High speed PC interface
Type
B-4205-QM
A stop and cut swing cutter
B-4800-PC-QM
This interface kit allows extremely high
speed information transfer between the
printer and PC.
B-4905-FF-QM This is a paper guide exclusively used for
fanfold paper.
Attaching it in place of the standard paper
guide allows the printer to print on fanfold
paper.
FMBC0067801
A 2MB RAM upgrade which enhances the
image handling capability of the printer.
A flash ROM card (1MB and 4MB) for
storing logos, writable characters and for-
mats.
B-570-QQ
Usage
2-1
EM1-33035
2.1 Printer
Source
See NOTE 1.
See NOTE 1.
See NOTE 1.
See NOTE 2.
See NOTE 3.