Directio Method Specifications/Directioevent Specifications; Common For Single Side Printer / Dual Side Printer; Only For Dual Side Printer - Toshiba TRST-A10 User Manual

TRST-A10/TRST-A15 POS Printer OPOS Control Application User's Manual

1.1.6 DirectIO Method Specifications/DirectIOEvent Specifications

This Control supports the following extended functions using the DirectIO method.

Common for Single Side Printer / Dual Side Printer

Command
TPTR_CMD_DIRECT_OUTPUT
TPTR_CMD_FILE_OUTPUT
TPTR_CMD_DRAWER_OPEN
TPTR_CMD_DRAWER_STATUS
TPTR_CMD_SETBITMAP_FLASH_START Start of bitmap registration to flash ROM
TPTR_CMD_SETBITMAP_FLASH_END

Only for Dual Side Printer

Command
TPTR_2STCMD_SET_PRINTINGMODE
TPTR_2STCMD_SET_PRINTINGSIDE
TPTR_2STCMD_SET_UPSIDEDOWN
TPTR_2STCMD_SWAPPRINTINGSIDE
TPTR_2STCMD_PREDEFINE
Table 9 TRSTA1x POS Printer Control – DirectIO Methods
This control supports the following extended functions using the DirectIOEvent event.
Data
TPTR_DIE_DRAWER_LOW
TPTR_DIE_DRAWER_HIGH
Table 10 TRSTA1x POS Printer Control – DirectIO Events
Function
Direct output to printer device
File data output
Drawer open
Acquisition of drawer status
End of bitmap registration to flash ROM
Function
Print mode setting
Print side setting
Upside-down print setting
Print side switch setting
Start/end of back side print data predefine
Function
Drawer Close notification
Drawer Open notification
TOSHIBA TEC CORPORATION EAA-02450
26