Memory Module; Flash Memory Card - Toshiba B-570 SERIES Owner's Manual

3. OPTIONAL KIT

3.3 MEMORY MODULE

This memory module is a D-RAM PC board used to extend the image buffer. An image buffer, equipped
with 2MB (2MB x 1) as standard, can be expanded up to 4MB by installing the 2MB of D-RAM PC board.
RAM
IC No.
Capacity
2MB
CAC-0293001
IC17~20
4MB
IC17~24 CAC-0293001
*: The size for the tag paper is 138.0 x 997.0.
D-RAM PC board is available from the Parts Center.
When purchasing please refer to the following.
8DRAM PC Board Ass'y
Part No. FMBC0067801 (Service No. B-249-01)
NOTE: Common use as B-672/872 Series.

3.4 FLASH MEMORY CARD

This flash memory card of 1 MB or 4 MB is used to save logs, writable characters and print format data.
It is directly connected to CN1 on the I/F PC board, and stored data can be overwritten by down-line-
loading from the PC.
When purchasing flash memory cards, refer to the following table. The proper operation of these
memory cards have been verified.
Capacity
1M
Byte
Centennial Technologies INC.
4M
Byte
3.5 FANFOLD PAPER GUIDE MODULE:
This is paper guide exclusively used for fanfold paper. Attaching it in place of the standard paper guide
allows the printer to print on fanfold paper.
For the installation procedure, refer to the Maintenance Manual.
Max. drawing size (normal)
Part No.
(W) x (H) (mm)
Batch
138.0 x 640.0
*138.0 x 995.0
Maker
Maxell
Mitsubishi
Maxell
Maxell
INTEL
Simple TECHNOLOGY
Mitsubishi
PC Card KING MAX
PC Card
Max. drawing size (on-the-fly)
Strip Auto-cut
Batch
*138.0 x
991.0
Type
EF-1M-TB AA
MF81M1-GBDAT01
EF-4M-TB CC
EF-4M-TB DC
FL04M-15-11119-03
IMC004FLSA
STI-FL/4A
MF84M1-G7DAT01
FJN-004M6C
FJP-004M6R
B-4905-FF-QM
3-3
(Revision Date: Feb. 10. 2000)
3.3 MEMORY MODULE
(W) x (H) (mm)
Auto-cut
Strip
138.0 x 320.0
138.0 x 661.3
Device code Maker code
D0H 1CH
88H B0H
ADH 04H
01H
A2H 89H
A0H 89H
EM10-33006A
Remarks
Option
Option