Toshiba B-570 SERIES Owner's Manual page 130

6. DIAG. TEST OPERATION
6.3.18 Reset Selection when the INPUT • PRIME Signal is ON.
Reset ON/OFF when the INPUT • PRIME signal ON is selected.
< 1 > D I A G N
< 2 > P A R A M
Press the [PAUSE] key 20 times.
I N P U T
Select the "Reset ON/OFF
when the INPUT • PRIME
signal is ON" with the [FEED] key
NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enable.
2. A changed "Reset ON/OFF when the INPUT • PRIME signal is ON" is stored in memory by
pressing the [PAUSE] key.
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
O S T I C .
Press the [FEED] key.
E T E R S E T
P R
I M E
or [RESTART] key.
Press the [PAUSE] key.
1 . O A
V
O N
• ON: The printer will restore to the initial status.
• OFF: The printer will not restore to the initial status.
6-40
EM18-33010A
(Revision Date: Dec. 10 '99)
6.3 PARAMETER SETTING MODE