Toshiba B-570 SERIES Owner's Manual page 132

6. DIAG. TEST OPERATION
Set the print count from those at the
right by pressing the [FEED] key or
[RESTART] key. (See NOTE 2.)
Press the [PAUSE] key. (See NOTE 3.)
Set the print speed
P R I
Press the [PAUSE] key. (See NOTE 3.)
Set the sensor type
S E N
Press the [PAUSE] key. (See NOTE 3.)
Set the ribbon type
R I B
Press the [PAUSE] key. (See NOTE 3.)
From B of the preceding page.
N T S P E E D
Select the print speed from those at
the right by pressing the [FEED]
key or [RESTART] key.
S O R T R A N S M I S S I V E
Select the sensor type from
those at the right by pressing
the [FEED] key or [RESTART]
key. (See NOTE 2 and 4.)
B O N T R A N S M I S S I V E
Select the ribbon type from
those at the right by pressing
the [FEED] key or [RESTART]
key. (See NOTE 2, 5 and 9.)
To be continued on
B of the next page.
5000 (Print count 5000)
1000 (Print count 1000)
500 (Print count 500)
100 (Print count 100)
50 (Print count 50)
10 (Print count 10)
5 (Print count 5)
3 (Print count 3)
1 (Print count 1)
5 i n c h / s
3 inch/sec.
5 inch/sec.
8 inch/sec.
NONE
(consecutive form)
REFLECTIVE
(black mark sensor)
TRANSMISSIVE
(feed gap sensor)
NO RIBBON
(No ribbon: Thermal direct)
TRANSMISSIVE
(Transmissive ribbon:
Thermal transfer)
NO TRANS.
(Non-transmissive ribbon:
Thermal transfer)
6-42
6.4 TEST PRINT MODE
Press the [FEED] key
and [RESTART] key
at the same time.
To C of the
preceding page.
Press the [FEED] key
and [RESTART] key
at the same time.
To C of the
preceding page.
Press the [FEED] key
and [RESTART] key
at the same time.
To C of the
preceding page.
Press the [FEED] key and
[RESTART] key at the same
time.
To C of the preceding page.
EM18-33010A