Table of Contents
Advertisement
13. Others
Videos
Recording videos is not possible.
• You may not be able to record for a short while after turning the camera on when using a large
capacity card.
Video recording stops in the middle.
• Video recording requires cards with speed class ratings that support particular types of
recording. Be sure to use a card of the recommended speed class. (>27)
Sometimes focus adjustment with Autofocus mode is difficult while recording
4K videos.
• This may occur when taking a picture by reducing the Autofocus speed in order to adjust the
focus setting with high precision. This is not a malfunction.
In videos, abnormal clicking and buzzing sounds are recorded.
The recorded sound is very quiet.
• With recording in a quiet environment, the sound of aperture and focus setting may be
recorded in videos. This is not a malfunction. The focus operation during recording of videos
can be set to [OFF] in [Continuous AF] (>155).
• While recording videos, if you block the microphone with your fingers, they may reduce the
level of audio recording or audio may not record at all. Also be careful because the operation
sound of the lens can easily be recorded at this time.
Operating sounds are recorded in a video.
• If the operating sounds made during recording bother you, we recommend changing the
relevant setting through touch operations. (>153)
• Since videos are recorded until the video button is pressed again to stop recording, noticeable
operating sounds may be heard when they are played back.
To suppress this sound, we recommend trying the following method.
> Cut off the end part of a video using [Video Divide] (>219) in the [Playback] menu. In some
cases, videos cannot be cut off at a position close to the end of the video. To avoid this
problem, continue recording for an extra 3 seconds.
Flash
No flash is emitted.
• Flash photography becomes unavailable in the following case.
> Flash set to [Œ]. (>146, 147, 149)
• When the electronic shutter function is used, flash is not activated. (>176)
• When [Silent Mode] is set to [ON], flash is not activated. (>175)
275
Advertisement
Table of Contents
