Table of Contents
Advertisement
10. Using Menu Functions
[Highlight Shadow]
Available in the following modes:
You can adjust the highlights and shadows in a picture while checking the results on the
screen.
>
[Rec]/
MENU
(Standard)
(Raise the contrast)
(Lower the contrast)
(Brighten dark areas)
/
/
(Custom)
1
Rotate the control ring to adjust the brightness of
bright areas / dark areas.
A Bright side
B Dark side
• Adjustments can also be made by dragging the graph.
• To register a preferred setting, press 3, and select the
destination where the custom setting will be registered to
([Custom1] (
2
Press [MENU/SET].
• The screen display can be switched by pressing [DISP] on the brightness adjustment screen.
• Turning off the camera will return the setting adjusted with
setting.
Not available in these cases:
• [Highlight Shadow] cannot be set in the following cases:
– When using [Panorama Shot]
– When using [Filter Settings]
[Motion Picture] > [Highlight Shadow]
No adjustments
Bright areas are brightened, and dark areas are darkened.
Bright areas are darkened, and dark areas are brightened.
Dark areas are brightened.
Registered custom settings can be applied.
)/[Custom2] (
)/[Custom3] (
)).
/
172
/
/
back to the default
Advertisement
Table of Contents
