Table of Contents
Advertisement
2. Getting Started/Basic Operations
• Do not leave any metal items (such as clips) near the power plug pins.
Otherwise, a fire and/or electric shocks may be caused by short-circuiting or the
resulting heat generated.
• Do not use any other USB cables except the supplied one.
This may cause malfunction.
• Do not use any other chargers except the supplied one.
This may cause malfunction.
• Do not use a USB extension cable.
• Do not use the charger and the USB cable for other devices. Doing so may cause
malfunction.
• Remove the battery after use. (The battery will be exhausted if left for a long period of time
after being charged.)
• The battery gets warm after using and during and after charging. The camera also gets
warm during use. This is not a malfunction.
• The battery can be recharged even when it still has some charge left, but it is not
recommended that the battery charge be frequently topped up while the battery is fully
charged. (Since characteristic swelling may occur.)
• If a problem occurs in the power outlet, such as a power outage, charging may not be
completed normally. If this happens, disconnect the USB cable and connect it again.
• The charger is in the standby condition when the mains plug is connected. The primary circuit
is always "live" as long as the mains plug is connected to an electrical outlet.
24
Advertisement
Table of Contents
