Table of Contents
Advertisement
3. Exposure Control Modes
Snapshot Plus mode allows you to adjust more settings yourself (see below) as opposed
to Snapshot mode.
Setting the brightness
Setting the color tone
Defocus Control
Menu items that can be
set
Autofocus, Face/Eye Detection, and Face Recognition
∫
The Autofocus mode is automatically set to [
function will work.
• The AF tracking function will also work if you press [
shutter button halfway.
• When [Face Recog.] is set to [ON], and a face similar to the registered one
is detected, [R] is displayed in the top right of [
About flash photography
∫
When using the flash unit included in the scope of delivery, the camera automatically
selects [
], [
], [
• Refer to (>146) for details about using external flash units.
• When [
] or [
• The shutter speed will be slower during [
Scene Detection
∫
• Use a tripod or similar support when the scene detection has been identified as [
When the camera has judged that camera shake is minimal, the shutter speed becomes slower
than normal.
Take care not to move the camera while taking pictures.
• Depending on recording conditions, different scene types may be selected for the same
subject.
The Backlight Compensation
When there is a backlight situation in which the main subject would appear darker, the
camera will automatically attempt to correct it by increasing the brightness of the
picture.
Backlight Compensation works automatically in Snapshot Plus and Snapshot modes.
Snapshot Plus mode
] or [
] according to the type and brightness of the subject.
] is set, Red-Eye Removal is enabled.
±
±
±
Many
]. If you touch the subject, the AF tracking
] and then the
], [
] and [
] or [
].
58
Snapshot mode
—
—
—
Few
].
].
Advertisement
Table of Contents
