Table of Contents
Advertisement
10. Using Menu Functions
[Peaking]
With this item, you can have the edges of in-focus sections highlighted with color during
manual focusing.
• When [Detect Level] in [SET] is set to [HIGH], sections to be highlighted are reduced, allowing
you to achieve a more precise focus setting.
• Changing the [Detect Level] setting also changes the [Display Color] setting as follows.
[Detect Level]
[Display Color]
• Each time [
] in [ ] is touched, the setting is switched in order of [
>
[LOW]
)
[
• [Peaking] is not available when using [Live View Boost]
• [Peaking] does not work with [Rough Monochrome] in [Filter Settings].
[Histogram]
When this item is activated, the histogram is displayed.
You can move the position by pressing 3/4/2/1.
• Direct touch operation is also possible on the recording screen.
• A histogram is a graph that displays brightness along the horizontal axis (black
to white) and the number of pixels at each brightness level on the vertical axis.
It allows you to easily check a picture's exposure.
A darker
B brighter
• When the recorded picture and the histogram do not match each other under the
following conditions, the histogram is displayed in orange.
– When using Exposure Compensation
– When a flash unit is activated
– When the correct exposure is not achieved, such as when the lighting is low.
• The histogram is an approximation in the exposure control mode.
[HIGH]
[
] (Light blue)
[
] (Yellow)
[
] (Yellow-green)
[
] (Pink)
[
] (White)
[Detect Level]
[HIGH]
] (
:
[LOW]
[
] (Blue)
[
] (Orange)
[
] (Green)
[
] (Red)
[
] (Gray)
>
)
[OFF].
188
[Detect Level]
] (
:
Advertisement
Table of Contents
