Table of Contents
Advertisement
10. Using Menu Functions
[Focus/Release Priority]
This item allows selecting whether to give priority to focus or shutter release during
Autofocus operation.
• Different settings can be applied to different Focus Mode settings ([AFS/AFF], [AFC]).
[FOCUS]
Disables recording when a subject cannot be focused.
Performs recording while controlling the balance between focusing and
[BALANCE]
shutter release timing.
[RELEASE]
Enables recording even when a subject is out of focus.
[Focus Switching for Vert / Hor]
This mode allows storing focus settings separately for the camera's horizontal and vertical
orientations.
Memorizes separate positions for horizontal
and vertical orientations (two vertical
orientations, left and right, are available).
• The following last-specified positions will be
[ON]
memorized.
– The last AF area position (when [
– The last MF Assist display position
[OFF]
Sets the same setting for both horizontal and vertical orientations.
[Loop Movement Focus Frame]
When setting the AF area position or the MF Assist display position, this mode allows
jumping directly from one edge to the other edge of the screen.
[AF Area Display]
This mode allows changing the AF area display setting for when the Autofocus mode is set
to [
] ([49-Area]) or [
Displays AF areas on the recording screen.
• AF areas are not displayed when the default AF area setting is applied to
[ON]
Displays AF areas on the recording screen for just a few seconds after you
[OFF]
start using them.
• Even when [ON] is set, the same operation as [OFF] is performed in the following cases:
– When recording videos
– When recording 4K pictures
], etc. ([Custom Multi]).
[
] ([49-Area]) or [
], [Ø] or [
], [
] or [
] in [Custom Multi].
183
] is used)
Advertisement
Table of Contents
