Table of Contents
Advertisement
13. Others
TV, computer and printer
No image on the TV. The TV screen is blurred or not colored.
• Is the camera connected to the TV correctly? (>255)
> Set the input selector of the TV to HDMI.
HDTV Link does not work.
• Is the [HDTV Link] on this camera set to [ON]? (>201)
> Check the HDTV Link setting on the connected device.
> Turn the camera off and on.
Cannot communicate with the computer.
• Set to [PC(Storage)] in [USB Mode]. (>200, 258)
• Turn the camera off and on.
The card is not recognized by the computer.
(An SDXC memory card is used.)
• Check if your computer is compatible with SDXC memory cards.
• A message prompting to format the card may be displayed when connecting, but do not format.
• If the [Access] displayed on the monitor does not disappear, disconnect the USB cable after
turning this camera off.
The picture cannot be printed when the camera is connected to a printer.
• Pictures cannot be printed using a printer that does not support PictBridge.
• Set to [PictBridge(PTP)] in [USB Mode]. (>200, 261)
The ends of the pictures are cut at printing.
• Release any trimming or edgeless printing settings on a printer before printing.
• The aspect ratio of pictures is different from that of the paper used for printing.
> If printing in a shop, check if 16:9 sizes can be printed.
279
Advertisement
Table of Contents
