Table of Contents
Advertisement
11. Using the Wi-Fi/Bluetooth function
Sending pictures while recording
∫
A picture can be automatically sent to a specified device every time you take one.
• While sending a file, [
• Set the menu to terminate the connection.
>
[Setup] > [Wi-Fi] > [Wi-Fi Function] > [Yes]
MENU
• You cannot change the sending settings while sending pictures.
• Since the camera gives priority to recording, sending may take longer during the recording.
• If you turn off the camera or terminate the Wi-Fi connection before the transmission is
completed, unsent files will not be resent.
• You may not be able to delete files or use the playback menu while sending.
Not available in these cases:
• If you set [Time Lapse Shot], the Wi-Fi connection is terminated and you cannot use this
function.
Sending pictures stored in the camera
∫
Pictures can be selected and sent after recording.
[Single Select] setting
1 Select the picture.
2 Select [Set].
[Multi Select] setting
1 Select the picture. (repeat)
• The setting is canceled when the picture is selected again.
2 Select [OK].
• To close the connection, select [Exit].
Not available in these cases:
• It may not be possible to send pictures recorded with another device and those modified or
edited on a computer.
] is displayed on the recording screen.
245
5
Advertisement
Table of Contents
