Table of Contents
Advertisement
4. Focus, Exposure Compensation and Color tone Settings
• In manual exposure mode, you can compensate the exposure only when the ISO sensitivity is
set to [AUTO].
• Depending on the brightness, this may not be possible in some cases.
• When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of the
flash illumination will automatically be set to the level appropriate to the selected exposure
compensation.
(This applies if the exposure is set with a function button)
• If you assign [Exposure Comp.] to a function button, the exposure compensation dial will be
disabled.
• You can set a value between
recording with the 4K Photo or Post Focus function.
• When the exposure compensation value is out of the j3 EV to i3 EV range, the brightness
of the recording screen will no longer change. It is recommended to check the actual
brightness of the recorded image in the Auto Review or playback screen.
• The exposure compensation value set with a function button is stored even if you set the
camera on/off switch to [OFF]. (When [Exposure Comp. Reset] is set to [OFF])
j
3 EV and
i
3 EV while recording motion picture or performing
91
Advertisement
Table of Contents
