Displaying Computers At Slave Switches - G&D miniMUX4 Installation And Operation Manual

Increasing the number of connectable computers

Displaying computers at slave switches

The computers that are connected to a slave switch are displayed in different menus
( Select Computer , CPU Config
The order in which the computers are displayed complies with the interface at
which the slave switch is connected to the master switch.
EXAMPLE: The miniMUX4 slave switch is connected to the
master switch.
The list contains four
computers that are connected to the four
46 · G&D miniMUX4
, User Profile ,
SELECT COMPUTER
CPU 1
 CPU 2
CPU 2.02
CPU 2.03
CPU 2.04
...
CPU 4
Esc Enter
CPU 2 entries. Use these interfaces to access or configure the
Edit Access Rights ).
miniMUX4
F1:Menu
CPU interfaces of the slave switch.
1
2
4
CPU 2 interface of the