Accessing A Computer By Using Key Combinations - G&D miniMUX4 Installation And Operation Manual

How to access a particular computer by using the On-Screen Display:
1. Press Ctrl+Num (standard) to open the On-Screen Display.
2. Use the
Arrow keys
NOTE: The On-Screen Display closes after the switching. An information dis-
play shows the active channel (see page 32).
NOTE: If you leave the menu by pressing

Accessing a computer by using key combinations

You can access a computer by pressing a key combination at the console keyboard.
For accessing a computer with a key combination, you do not need to open the on-
screen display. Switching by using a key combination is therefore the fastest way to
switch between channels.
How to access a particular computer by using key combinations:
1. Press the
Hotkey+Select Key
In the default configuration, you can switch the channel by pressing
select keys 1 to 4 .
The channel is switched when the keys are released.
NOTE: The On-Screen Display closes after the switching. An information dis-
play shows the active channel (see page 32).
ADVICE: The select keys are displayed in the right column of the
menu (see page 10).
Further Information:
 Changing hotkeys or double hotkeys on page 37
 Changing select keys on page 40
 Defining select keys on page 27
to select the computer to be accessed and press
key combination at the console keyboard.
, the channel is not switched.
ESC
G&D miniMUX4 · 11
Getting started
.
Enter
and the
Ctrl
Select Computer