Support Of Special Ps/2 Keyboards; Resetting The Defaults - G&D miniMUX4 Installation And Operation Manual

Support of special PS/2 keyboards

The KVM switch supports the following special keyboards:
 PixelPower Clarity (blue)
 SKIDATA1
If you apply such a keyboard at the console, you can enable the support of one of
these keyboards in the KVM switch.
How to enable/disable the support of special keyboards:
1. Press (standard) to open the On-Screen Display.
Ctrl+Num
2. Press F1 to open the
3. Use the Arrow keys
4. Use the Arrow keys
IMPORTANT: A yellow
keyboard is highlighted, the keyboard is treated as standard keyboard.
5. Select the keyboard layout you want to disable/enable, and press
6. Leave the menu by pressing
7. Press to save your settings.
F1

Resetting the defaults

This function resets the defaults of the KVM switch. After you perform the function,
all defaults apply again.
How to reset the default configuration:
1. Press Ctrl+Num (standard) to open the On-Screen Display.
2. Press F1 to open the
3. Use the Arrow keys
4. Use the
Arrow keys
5. Press Esc to cancel the function or
Function menu.
to select System Config
to select PS/2 Keyboard Type
X highlights the active special keyboard. If no special
.
Enter
Function menu.
to select System Config
to select
Set System Defaults
Space
and press Enter .
and press Enter .
and press Enter .
and press .
Enter
to reset the defaults.
Configuration
Space .
G&D miniMUX4 · 43