Configuration; Configuring Consoles; Adjusting The Time Between Automatic Switchings - G&D miniMUX4 Installation And Operation Manual

Configuration

Configuring consoles

Any user can view and edit the console configuration settings by using the
menu.
Setup
IMPORTANT: Only the Supervisor and users with active configuration rights can
change the Scancode Set
The following settings are active in the default settings of the KVM switch:

Adjusting the time between automatic switchings

In the default configuration, the Autoscan or Autoskip function access a new computer
every five seconds (see page 12 ff.).
The time span between switchings can be between 2 and 60 seconds.
How to adjust the time span between automatic switchings:
1. Press (standard) to open the On-Screen Display.
Ctrl+Num
2. Press to open the
F1
3. Use the Arrow keys
4. Use the Arrow keys
5. Use the Numeric keys
6. Press to save your settings.
F1
.
CONSOLE SETUP
Autoscan Time:
Keyboard Layout:
Screensaver:
Auto Logout:
Console Name:
Show Display:
Display Position
Menu Position
Scancode Set:
OSD by Mouse:
Stepkeys:
Esc Enter
menu.
Function
to select Console Setup
to select Autoscan Time
to enter the value and press
miniMUX4
5 Sec
German
Off
Off
miniMUX4
Temp
...
...
2
No
Up Dwn
F1:Save
and press Enter .
.
Enter .
Configuration
Console
G&D miniMUX4 · 29