Enabling Or Resetting Ps/2 Mouses - G&D miniMUX4 Installation And Operation Manual

Enabling or resetting PS/2 mouses

Unlike USB mouses, PS/2 mouses do not support hot plug technology. You can
therefore insert the PS/2 plug during operation, but the input device might not be
detected by the computer.
To enable or reset the PS/2 mouse, the KVM switch can be used to send a special
command to the computer.
Since the commands differ depending on the used mouse type and the installed
operating system, four different setup keys are provided.
How to enable or reset the PS/2 mouse:
1. Press (standard) to open the On-Screen Display.
Ctrl+Num
2. Press F1 to open the
3. Use the Arrow keys
4. Select one of the following functions and press
Reset Mouse:
Enable Mouse (for Unix):
Enable Intelli:
Enable Intelli-Explorer
Function menu.
to select Mouse Utility and press
Resets PS/2 mouse interface of a Windows computer
Enables PS/2 wheel mouse of a Linux computer
Enables PS/2 wheel mouse of a Linux computer
Enables PS/2 wheel mouse with additional mouse
keys of a Linux computer
Getting started
Enter .
:
Enter
G&D miniMUX4 · 15