Maintenance - Bristan ALP Series Installation Instructions & User Manual

Maintenance

General Cleaning
Your product has a high quality finish
and should be treated with care to
preserve the visible surfaces. All
surfaces will wear if not cleaned
correctly, the only safe way to clean your
mixer is to wipe with a soft damp cloth.
Stains can be removed using washing
up liquid. All bath cleaning powders and
liquids will damage the surface of your
fitting, even the non-scratch cleaners.
Note: Never use abrasive detergents
or disinfectants or those containing
alcohol, hydrochloric acid or phosphoric
acid.
Cleaning the Cartridge
Before carrying out any maintenance,
turn off the both water supplies or close
any isolating valves.
Loosen the grub screw using a 2.5mm
hexagonal key. Remove the handle,
prise out the shroud cover and remove
the cartridge shroud. Remove the
cartridge.
Clean the cartridge thoroughly under
cold water to remove any build up of
limescale or debris.
If necessary replace the cartridge using
parts supplied by Bristan only.
Replace the cartridge into the body.
Replace the cartridge shroud, shroud
cover and the handle. Tighten the grub
screw.
2.5mm hexagonal
key
Grub Screw
Shroud
Cover
Handle
Tap Body
Cartridge
Shroud
15