Table of Contents
Advertisement
Maintenance
General Cleaning
Your product has a high quality finish
and should be treated with care to
preserve the visible surfaces. All
surfaces will wear if not cleaned
correctly, the only safe way to clean
your mixer is to wipe with a soft damp
cloth. Stains can be removed using
washing up liquid. All bath cleaning
powders and liquids will damage the
surface of your fitting, even the non-
scratch cleaners.
Note: Never use abrasive detergents
or disinfectants or those containing
alcohol, hydrochloric acid or
Cleaning
Before carrying out any maintenance,
turn off both water supplies or close
any isolating valves to the tap.
Prise out the rubber cap, losen the
grub screw using a 2.5mm hexagonal
key and remove the handle.
Screw the locking nut and remove the
valve using the correct size socket.
Wash the valve with clean running
water and make sure that any debris
has been removed.
If necessary replace the valve using
parts supplied by Bristan only.
Lightly grease the seal (only use
silicone grease), replace the locking
nut and handle.
Tighten the grub screw and push
fit the rubber cap.
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
Handle
Locking
Nut
Important: Tighten the valve with
the correct size socket and apply
appropriate force/torque.
Do not overtighten.
2.5 mm
hexagonal key
Rubber
Bung
Grub
Screw
Valve
11
Advertisement
Table of Contents
