Advertisement
Quick Links
TECHNICALDATASHEET
ARTISAN
ARTISAN MONOBLOC SINK MIXER
ProductSpecification
Product Code:
Finish:
Product Type:
Construction:
Valve Type:
Supply:
Inlet Connections:
Water Pressure:
AdditionalInformation
• Dual flow.
• Supplied with metal handles.
• Chrome plated to BS EN 248.
Technical Advice:
Guarantee:
Compliance/Approvals
WRAS:
FlowRates (litres per minute)
SystemPressure
AR SNK C (mixed)
Bristan, Birch Coppice Business Park, Dordon, Tamworth, B78 1SG
Telephone: 0844 701 6274 Facsimile: 0844 701 6275
Web Site: www.bristan.com Email: enquire@bristan.com
AR SNK C
Chrome
Contemporary
Body is of brass construction
and is designed to conform to BS EN 200
¼ turn ½" ceramic disc valves
Suitable for all plumbing systems
M12 x 15mm screw-in copper tail pipes
Min. 0.5 bar, Max. 8.0 bar
For further information please call 0844 7016273 or email customercare@bristan.com.
5 years covering manufacturing faults.
Certificate No. 0601116
0.5bar
1.0bar
13.6
19.8
1.5bar
2bar
24.6
28.6
3bar
5bar
35.3
45.9
D2
Advertisement
Related Manuals for Bristan Artisan AR SNK C
Summary of Contents for Bristan Artisan AR SNK C
- Page 1 Min. 0.5 bar, Max. 8.0 bar AdditionalInformation • Dual flow. • Supplied with metal handles. • Chrome plated to BS EN 248. Technical Advice: For further information please call 0844 7016273 or email customercare@bristan.com. Guarantee: 5 years covering manufacturing faults. Compliance/Approvals WRAS: Certificate No. 0601116...
- Page 2 NOTE: Never use abrasive detergents or disinfectants or those containing alcohol, hydrochloric acid or phosphoric acid. Bristan recommend E-Cloth for cleaning all of our bathroom & kitchen products. Using just water, E-cloth gives a smear free, deep clean by breaking up and holding dirt, which normal cloths leave behind.
- Page 3 WATER PRESSURE INSTALLATION This mixer is suitable for use at all supply pressures. However for optimum use both 1. Identify all components and check for completeness, particularly before the hot and cold supplies should be reasonably balanced. commencing installation. If the fitting is installed at low pressure (tank fed), then the minimum distance from the highest installed position of the shower head to the underside of the cold tank should 2.