Bristan ALP Series Installation Instructions & User Manual page 12

Installation Cont.
Bath Shower Mixer Cont.
7. Connect the side body to the diverter
using the flexi tail supplied.
8. Connect the spout to the diverter using
the flexi tail supplied.
9. Fit the shower head holder to the bath.
Remove the backnut and the washers and
feed the threaded tail through the hole in
the bath. Secure in place by screwing the
backnut onto the threaded tail ensuring the
washers are fitted.
10. Feed the shower hose through the
shower head holder and screw the
connecting nut onto the bottom of the hose.
Connect the hose to the diverter body.
11. Fit the shower head to the hose
ensuring the small sealing washer is fitted.
12. Turn on both water supplies, operate
the handle in both directions, letting the
water flow for a few minutes to flush
through the system.
13. Check all joints and connections for
leaks.
12