Checking the Power Line Fuses
The power line fuses are located within the N432A fuse holder assembly on the
rear panel. For all voltages, the N432A uses 250 V, T2.5 H, 20 mm slow blow fuses
with high breaking
Use the following procedure to check the power line fuses:
1 Slide the fuse holder assembly from the rear panel as shown in the figure
2 The fuses should be positioned "in line" as shown below. Ensure that both
3 Slide the fuse holder assembly back into the rear panel.
Figure 4-1
Keysight N432A Service Guide
capacity.
below.
fuses are operational.
In-line fuses
Checking the fuses
Service and Maintenance
4
53