Table of Contents
Advertisement
Regulatory Information
The N432A complies with the requirements of the EMC Directive 89/336/EEC.The
N432A also complies with the following safety and Electromagnetic Compatibility
(EMC) compliances:
Safety compliance
– IEC 61010- 1:2001/EN 61010- 1:2001
– CAN/CSA- C22.2 No.61010- 1- 04
– ANSI/UL61010- 1:2004
EMC compliance
The N432A complies with the essential requirements of the following applicable
European (EC) Directives, and carries the CE marking accordingly to the Low
Voltage Directive (2006/95/EC) and EMC Directive (2004/108/EC).
EMC tests conform to the IEC 61326- 2- 1:2005/EN 61326- 2- 1:2006 and CISPR
11:2003/EN 55011:2007 (Group 1, Class A). In order to preserve the EMC
performance of the N432A, any cable which becomes worn or damaged must be
replaced with the same type and specification.
The N432A also meets the following EMC standards:
– Canada: ICES- 001:2004
– Australia/New Zealand: AS/NZS CISPR11:2004
Degradation of some instrument specifications can occur in the presence of
ambient EM fields and noise that are coupled to the power line or I/O cables of the
N432A. The N432A will self- recover and operate to all specifications when the
source of ambient EM fields and noise are removed or when the N432A is
protected from the ambient EM fields or when the N432A cabling is shielded from
the ambient EM noise.
8
Keysight N432A Service Guide
Advertisement
Table of Contents
