Rear Panel Connections - Keysight N432A Service Manual

Rear Panel Connections

No.
1
2
3
4
5
6
7
Keysight N432A Service Guide
1
4
5
Connection
Ground connector
Recorder output terminal 1
Recorder output connection is made via a BNC connector. This output produces a DC voltage
that corresponds to the power level of the channel input.
AC inlet
The N432A has an auto-configuring power supply. This allows it to operate over a range of
voltages without manually being set to a certain voltage.
V and V output terminals
RF COMP
The V BNC terminal outputs the RF bridge voltage, while the V
RF
compensation bridge voltage. Both the V
N432A and for precision power measurements.
USB Mini-B port
Allows the N432A to be controlled remotely over the USB interface.
LAN interface
Allows the N432A to be controlled remotely over the LAN interface.
GPIB interface
Allows the N432A to be controlled remotely over the General Purpose Interface Bus (IEEE-488)
standard interface.
2
3
6
7
and V
RF COMP
N432A at a Glance
BNC terminal outputs the
COMP
outputs are used for calibrating the
1
23