Standard Carriage Operation; Fork Positioning Carriage Operation - Xtreme XR1555 Operation And Safety Manual

Operation
Figure 73. Fork Ratings
(A) Maximum Load Capacity Rating (B) 24 inch Load Center
DO NOT use attachments that are corroded
excessively.

Standard Carriage Operation

The standard carriage uses manually adjustable forks and can
be tilted up or down by using the thumb stick on the control
handle.
1
A
2
Warning
CONTROL
BOOM
FORK TILT
RETRACT
DOWN
SWAY
LEFT
FORK TILT
UP
CONTROL
Figure 74. Attachment Tilt
Control Thumbstick (A).
(1) Attachment Tilt Down
(2) Attachment Tilt Up

Fork Positioning Carriage Operation

Do not adjust forks when the carriage is loaded. Adjusting
forks when carriage is loaded may result in loss of load or
carriage damage. Always use Fork Positioning (Aux Control)
buttons to adjust the forks BEFORE loading the carriage.
To move the forks outward, press the Aux Control top button
(1) on the front of the joystick. To move the forks inward, press
the lower button (2) on the front of the joystick.
Figure 75. Auxiliary Control Buttons
AUX
BOOM
EXTEND
SWAY
is rated to be equal or greater than 3,500 psi, which is the
RIGHT
maximum pressure of the Telehandler auxiliary hydraulic
AUX
system at the quick-disconnect couplers, could result in
death or serious injury.
When the Attachment Tilt Control Thumbstick is moved, it
activates hydraulic pressure through the quick attach couplers
(A) and (B) to move the carriage.
61
Caution
1
BOOM
FORK TILT
RETRACT DOWN
SWAY
LEFT
2
FORK TILT
UP
Warning
Hydraulic attachments have a
maximum hydraulic pressure
rating. Failure to make sure the
attachment is equipped with
a pressure reducing valve, or
JOYSTICK
ENABLE
Operation Manual Operation Manual
AUX
CONTROL
BOOM
EXTEND
SWAY
RIGHT
AUX
CONTROL
18408-001