Standard Carriage Operation; Swing Carriage Operation - Xtreme XR1045 Operation & Safety Manual

Operation
Figure 7-17. Fork Ratings.
(A) Maximum Load Capacity Rating. (B) 24 Inch Load Center.
Because forks are always used in multiples, the total
rating of any combination of forks will be the sum of their
rated capacity Other than block forks, all forks should
be used in matched pairs Block forks should be used in
matched sets
The maximum load capacity for this forklift is 10,000
pounds (4,536 kilograms) The matched pair or set of
forks used on this forklift should have total load ratings
which equal or exceed 10,000 pounds (4,536 kilograms)
When the load rating of the forklift differs from the load
capacity of the forks, the lower value becomes the overall
load capacity

Standard Carriage Operation

The standard carriage uses manually adjustable forks and
can be tilted up or down by using the thumb switch on
the control handle
Figure 7-18. Attachment Tilt Control Switch. (A) Attachment Tilt
Down. (B) Attachment Tilt Up.
Page 58
Swing Carriage Operation (Optional)
The swing carriage pivot left or right using the auxiliary
attachment control lever
Figure 7-19. Auxiliary Attachment Control Lever.
XR1045
Xtreme Manufacturing, LLC