Xtreme XR1555 Operation And Safety Manual page 41

Operator Cab
EZCal MAIN SCREEN
Use the upper left buttons to navigate; use the upper right
buttons to change settings.
Figure 39. EZCal Main Screen
Use the left/right buttons to navigate to the "Access Level 3"
screen and press enter. Use the up/down buttons to change
the code and left/right to scroll. Enter code "1010" and press
enter. Screen now show s"Access Level 1" if entered correctly.
ADJUSTMENT SCREEN
Using the left/right buttons, navigate to adjustments and
press enter. From here adjust the following settings to match
the settings below. Once adjustments are complete press
the lower left hand button repeatedly till you are at the main
gauge screen.
NOTE: Speeds and Accel can be adjusted to preference.
Increasing Decel will increase stop times. Keep this setting to
0.3 or lower.
Figure 40. Adjustment Screen
EZCal RECOMMENDED SETTINGS
Up Min 35%
Up Max 75%
Down Min
Boom
Down Max
Accel 2.5 sec
Decel 0.3 sec
Lift not ELEV 0.0 sec
Out Min
Adjustments Out Max
In Min
Tele
In Max
Accel 2.0 sec
Decel 0.0 sec
Up Min
Up Max
Fork
Down Min
Down Max
Fork Accel
Continued
Decel
35%
Left Min
63%
Left Max
Right Min
Right Max
37%
Accel
Adjustments
70%
Decel
Frame
37%
65%
Frame/Elev
37%
60%
35%
60%
CLOCK SETUP
Pressing the CLOCK SETUP soft button will enter a menu
where the clock can be setup or adjusted.
Figure 41. Clock Setup Menu
DIAGNOSTICS
Pressing the ENGINE DIAGNOSTICS soft button will display
engine information. Use the up/down buttons to navigate
Press the MENU button to return to the GAUGE DISPLAY mode.
Figure 42. Diagnostics Menu
USER SETTINGS
Pressing the USER SETTINGS soft button will enter a mode
where some display settings may be adjusted using the Up/
Down buttons. The top left button restore the default settings.
2.0 sec
0.0 sec
40%
60%
35%
55%
0.0s
0.0s
Left Min 30%
Left Max 40%
Right Min 30%
Right Max 40%
Accel 0%
Decel 0%
Figure 43. User Settings
41 Operation Manual Operation Manual